Sharp HT-X1 - Manual (Page 18)

18
HT-X1
Pre
paration
for Use
Main unit preparation
Button name label
Placing horizontally
Notes:
Caution:
Stand
When attaching or removing the stand, place the main unit on
a cushion or soft cloth to avoid damage.
Remove the only specified screws. Malfunction may occur. Be
careful not to lose the removed screws.
Note:
Attach the button name label carefully. It is difficult to peel off.
The stand is attached to the main unit at the factory.
Make sure to unplug the AC power cord before installing
the main unit or change the position.
You can also place the main unit horizontally or mount it on the
wall without the stand.
(See page 62 for mounting it on the wall.)
Do not change the installation direction when the main unit is
turned on as the disc may not be read or may be damaged.
Installation methods
1 Remove the 2 screws
and the stand.
2 Fix the removed screws.
3 Attach the included
button name label.
Stand