Audio connection to other equipment, Adv anced f eatures – Sharp HT-X1 User Manual
Page 61
61
HT-X1
Adv
anced F
eatures
Audio connection to other equipment
You can hear the sound of other equipment via this product. Con-
nect the DVD player, VCR or digital tuner to a TV directly to receive
the images (refer to the operation manual of each equipment).
Caution:
Turn off the other equipment before making this connection.
Notes:
!
Change the audio between analog and digital with the AUX (DIG-
ITAL/ANALOG) button.
!
Insert the plugs fully to avoid fuzzy pictures or noise.
"
Connection for the analog sound (VCR, etc.)
"
Connection for the digital tuner sound (or other
optical digital equipment such as an MD player)
If the digital equipment has an optical output jack, you can enjoy
better sound by connecting it to the optical digital input jack of the
main unit using the optical digital cable.
Note:
When connecting with an optical digital cable, set the digital output
of the digital tuner to PCM. Refer to the operation manual of the dig-
ital tuner.
To audio
output jacks
To audio
input jacks
Audio cable
(commercially available)
VCR, DVD recorder
Main unit
TV
Optical digital jack cap
When using the optical digital jack, remove the cap
first. After using the jack, replace the cap.
To optical
digital audio
input jack
Digital tuner, etc.
To optical
digital audio
output jack
Optical digital cable
(commercially
available)
Digital equipment such
as a digital music player
TV
Main unit