Sharp HT-X1 - Manual (Page 23)

23
HT-X1
Pre
paration
for Use
Connecting to a TV with an S-video input jack:
If your TV is equipped with an S-video input jack, you can enjoy
higher quality images by connecting it with an S-video cable (not
supplied).
Note:
When the video and S-video cables are both connected, the images
from the S-video input jack appears on your TV.
Connecting to a TV with component video input jacks:
If your TV is equipped with component video input jacks, purchase a
component video cable to enjoy higher quality images.
Notes:
! If your TV has different indications for the component video
inputs (Y, CB and CR or Y, B-Y and P-Y), connect jacks with its
matching color.
! Some component video jacks designed for the high-vision sys-
tem are not compatible with DVD. Do not connect this unit to
those component video input jacks. (Images may appear dis-
torted or may not appear due to the system difference.)
Set the video mode to "Interlace" (default setting). For the proce-
dure, refer to "Changing the video output mode" on page 22.
Main unit
TV
To S-video
input jack
To S-video
output jack
Video signal
S-video cable
(commercially available)
For a progressive scan TV, set the video mode to "Progressive".
Select "Interlace" for a non-progressive scan TV. For the proce-
dure, refer to "Changing the video output mode" on page 22.
TV
Main unit
To component
video input jacks
To component
video output
jacks
Component video cable
(commercially available)
Red
Blue
Green
Video signal