Sharp HT-X1 User Manual

Page 22

HT-X1

Pre

paration

for Use

System connections (continued)

TV connection

Three types of jacks (VIDEO OUT, S-VIDEO OUT and COMPO-
NENT VIDEO OUT) are available for connection of a TV and the
main unit. Connect according to your TV.

Connecting to a TV with a video input jack:
You can enjoy DVD images by connecting your TV and the main
unit with the supplied video cable.

What is progressive scanning?
The conventional TV system displays 30 frames of still images per
second to complete sequential movement (interlaced scanning).
Whereas, progressive scanning displays one frame every 1/60th of
a second (60 frames per second) to realize less-flicker, high-density
images.

Set the video mode to "Interlace" (default setting). For the proce-
dure, refer to "Changing the video output mode".

Notes:

Change the TV input in accordance with the connected jack.

Do not connect other equipment (VCR, etc.) between the TV and
the main unit. Images may be distorted.

Refer to the operation manual of the equipment to be connected.

Insert the plugs fully to avoid fuzzy pictures or noise.

Main unit

To video
input jack

To video
output jack

Video signal

Video cable
(supplied)

Changing the video output mode:

Insert a DVD disc (steps 1 - 3, page 28).

In the stop mode, press the SHIFT button and SCAN SELECT
button on the remote control.

Each time these buttons are pressed, the mode will change in
the following order:

Caution:

To enjoy images on a TV, make sure to select the right items
for the following four: video cable, TV's video input jack, and
this unit's video output jack and video output mode. Other-
wise, images do not appear properly.

Compatibility of the progressive scan TV

Some progressive scan TVs are not fully compatible with this prod-
uct, which may cause image distortion. In this case, switch the vid-
eo mode from "Progressive" to "Interlace".

Interlace

Select this for a non-progressive scan TV
(use a video cable, S-video cable, or
component video cable).

Progressive
(No display)

Select this for a progressive scan TV
(use a component video cable).