Sharp HT-X1 - Manual (Page 60)

60
HT-X1
Adv
anced F
eatures
Sleep operation
You can set the system to the power stand-by mode at the specified
time.
To confirm the remaining sleep time:
Press the SLEEP button while the sleep timer is set.
The remaining sleep time is displayed for about 8 seconds.
To cancel the sleep operation:
Press the ON/STAND-BY button while the sleep timer is set.
1 Play back the desired sound source.
2 Press the SLEEP button and within 8 seconds, press the
ENTER button.
To change the sleep time:
While the sleep time is displayed, press the or button.
(Maximum: 3 hours - Minimum: 5 minutes)
3 Within 30 seconds, press the ENTER button.
4 The system will enter the power stand-by mode automati-
cally after the preset time has elapsed.
The volume will be turned down 30 seconds before the sleep
operation finishes.
3:00 2:00 1:30 1:00
(cancel) 0:05 0:10 0:15 0:30