Sanyo VPC-J1 - Manual (Page 69)

OTHER SHOOTING FUNCTIONS
Using the zoom
There are two zoom functions: optical zoom and digital zoom.
1
Make the zoom setting (see page
109), and point the camera lens at
the subject.
2
Press [ T ] or [ W ] on the zoom switch
to compose the desired image.
[
T ]: Zoom in on the subject.
[ W ]: Zoom out.
œ
When the zoom switch is pressed,
the zoom bar appears on the LCD
monitor.
œ When the optical zoom factor is at
maximum, zooming stops
temporarily. When [T] on the zoom
switch is pressed again, the mode
changes to the digital zoom mode
and zooming continues (if digital
zooming is enabled).
3
Press the shutter release button.
NOTE
œ The digital zoom cannot be used when you are shooting without using the
LCD monitor.
œ
During video clip recording when shooting in the BASIC mode, the optical
zoom does not operate; however, it may be possible to use the optical
zoom when shooting in the EXPERT mode (see page 109).
[ W ]
Zoom switch
LCD monitor
[ T ]
When both optical
and digital zoom
are enabled
Pointer
Zoom bar
Optical zoom
Digital zoom (yellow)
When optical zoom
only is enabled
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
English
66