Sanyo VPC-J1 - Manual (Page 108)

LIGHT-MEASURING MODE SETTING
You can select from 3 types of light-measuring modes.
Multi-section light-measuring: Light is measured by sampling from multiple
areas of the entire shooting screen.
Center-weighted light-measuring: Light is measured from the entire shooting
screen, but gives more importance to the
values near the center.
Spot light-measuring: You can compose the picture and capture the image
after first measuring the light only at the center spot of
the LCD monitor.
1
Display an EXPERT Mode Shooting
Setting Screen (see page 94).
2
Select the desired light-measuring
mode from the light-measuring
mode (EXP MEASURE) menu.
V : Multi-section light-measuring
X : Center light-measuring
W : Spot light-measuring
3
Press the SET button.
œ
This completes the light-measuring
mode setting.
œ
When spot light-measuring is
selected, the light-measuring spot
mark
K appears in the center of
the LCD monitor.
12
EXP MEASURE
MULTI
12
2.8
1/50
Light-measuring spot mark
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
105
English