Sanyo VPC-J1 - Manual (Page 149)

POWER SAVE SETTING
Your camera has a “power save” function whereby the power automatically
turns off after a specified period of inactivity. The power save function works
to conserve the battery pack power when the camera is not being used, or to
prevent the battery pack from dying if the camera has accidentally been left
on. You can specify the elapsed time (standby time) before the power save
function is activated.
1
Display the Option Setting Mode
Screen (see page 135).
2
Select the power save icon
é
, and
press the SET button.
œ The Power Save Setting Screen
appears.
BATT/CAM: Set the standby time for
the shooting modes when
the battery pack is used.
BATT/PB: Set the standby time for the
playback modes when the
battery pack is used.
EXT.PWR/CAM.PB: Set the standby
time for the
shooting and
playback modes
when the AC
adapter is
connected.
EXIT: Return to the Option Setting
Mode Screen.
CLOCK SET
OPERATION BEEP
GUIDANCE
LANGUAGE
TV SYSTEM
REFORMAT
POWER SAVE
POWER SAVE
BATT/CAM p 1min.
BATT/PB p 5min.
EXT.PWR/CAM.PB p 10min.
EXIT
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
English
146