Sanyo VPC-J1 - Manual (Page 110)

WHITE BALANCE SETTING
3
Press the SET button.
œ
This completes the white balance
setting.
œ Once the white balance setting is
programmed for the
S icon, it is
retained even if another white
balance setting (
H , g , h , e ,
or i ) is selected. If you changed to
another setting, whenever you select
the
S icon and press the SET
button, the previously programmed
setting is recalled.
HINT
To cancel the white balance setting
œ
Perform step 2, select H , and then press the SET button.
NOTE
To capture sepia-tone images
œ
In step 2 of step 2, instead of using a white card, use a blue card to set
the white balance. You can experiment and get different results by
changing the card color to program the white balance.
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
107
English