Sanyo VPC-J1 - Manual (Page 143)

6
Select “EXIT”, and press the SET
button.
œ The date and time setting is
completed, and you are returned to
the Option Setting Mode screen.
NOTE
œ Under normal conditions, while the battery pack is being replaced, an
internal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost. (The backup will last for about 7
days.) It is recommended to check that the date and time settings are still
correct after replacing the battery pack and before shooting or recording of
any type (follow steps 1 and 2).
To correct the date and time settings
œ After steps 1 and 2, press [
Á
] on the arrow button to select the line of the
setting that you want to change, and press [
Ã
] to select that setting. Then
press [ À ] or [ Á ] to set the new setting.
CLOCK SET
OPERATION BEEP
GUIDANCE
LANGUAGE
TV SYSTEM
REFORMAT
POWER SAVE
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
English
140