Sanyo VPC-J1 - Manual (Page 158)

CHECKING THE REMAINING BATTERY PACK
CHARGE
When using the battery pack, the remaining battery pack charge can be
checked on the LCD monitor. Make sure to check this indicator before
capturing an image. For an indication of the possible length of time for battery
pack operation, see page 192.
1
Display a Shooting or Playback
Information Screen (see pages 115
and 133).
œ The battery pack remaining charge
indicator appears in the lower right
corner of the LCD monitor.
œ
к з
and
л з
(flashing) will
appear even when the Shooting
Information Screen or Playback
Information Screen is not displayed.
œ Due to the battery pack characteristics, when the ambient temperature
is low,
и з
may appear early for an incorrect indication of the
remaining charge. Also, depending on the conditions of use of the
digital camera or the ambient conditions (temperature, etc.), the
indicated remaining charge may change. Therefore, this indication can
only be used as a general approximation of the remaining charge.
INFO 12
Remaining charge indicator
Information Screen
Battery pack remaining charge
Information
Screen
When
Information
Screen is
not
displayed
й з No indication Approx. full.
и з No indication Power is low.
к з к з It will soon be impossible to capture or play back images.
л з л з
If this icon flashes when the shutter release button is
pressed, images cannot be captured. If it flashes while a
video clip is being edited, the editing cannot be
performed. Recharge the battery pack.
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
155
English