Sanyo POA-MD13NET2 - Manual (Page 50)

50
Chapter 4 Controlling the Projector
Total Save
This function is to save and load the control values of the projector. The
storable control items are from Input to Service sub menu.
1 Adjust and set the controls
Set the controls properly according to the selected source. (see pages 37-49 for
further adjustment)
2 Select the Save page
Click Total Save sub menu tab. The
setting page is displayed as the right.
When pressing Check button, the
control pages are automatically
switched and the status of each con-
trol are displayed. For further informa-
tion please see the next page.
3
Name the current setting
Select a set number (Totalsave1 to Totalsave10) you intend to store current set-
tings with the pull-down menu button of the Save Setting No.: Save to. Name this
set number onto the Memo text area.
*Up to 18 characters can be used for the Memo.
4
Save the current setting
Click Set button to store the current setting and name into the selected set num-
ber.
✐ You can store up to 10 sets (Totalsave1 to Totalsave10) of controls into the Network Board.
Select a set
number
Type a memo for the
selected set number