Sanyo POA-MD13NET2 - Manual (Page 39)

39
Network Board
OWNER’S MANUAL [HD Series]
ENGLISH
Control the projector
Display
This function is to adjust the signal from the computer or AV equipment
connected to the projector to obtain the proper picture image on the
screen. Click on the page number to change the setting pages.
Item Description
Screen ................Switches the projection mode
of the screen.
H-Scale ..............Adjusts the screen width.
H-Position ..........Adjusts the horizontal position
of the screen.
V-Scale ..............Adjusts the screen height.
V-Position ..........Adjusts the vertical position of
the screen.
Auto PC Adj. ......Performs automatic adjust-
ment.
Item Description
Total Dots ..........Adjust the number of total dots
in the horizontal period.
Horizontal ..........Adjusts horizontal picture posi-
tion.
Vertical ..............Adjusts vertical picture posi-
tion.
Display Area H ......Adjusts the image area horizontally.
Display Area V ......Adjusts the image area vertically.
Current Mode ........Displays the mode of current
selected signal.
Clamp ................Adjusts the side black portion
of the screen
x
z