Sanyo POA-MD13NET2 - Manual (Page 44)

44
Chapter 4 Controlling the Projector
Setting
This function is to set up the projector. Click on the page number “1” to “4” to
change the setting pages.
Item Description
Language ..........Changes the on-screen menu
language of the projector.
Lamp Mode........Switches lamp mode 1 lamp or
2 lamps mode, or 2 lamps or 4
lamps mode.
Blue Back ..........Switches on or off the blue
images on the screen when no
input signal received.
Display ..............Switches on or off the on-screen
menu display on the screen.
Logo ..................Sets on or off the logo display on
the screen during the startup.
Ceiling................Sets the image top/bottom and
left/right reversed.
Rear ..................Sets the image left/right
reversed.
Item Description
Management......Sets into the selected power
management mode, OFF,
Ready or Shut Down, if the
input signal is interrupted and
no control key is pressed for
the specified period of time.
*The specified time can be set
up to 30 min.
On Start ............Sets the power-on mode when
turning on the mains switch.
No Show ............Sets the image black out mode.
Freeze................Sets the image frozen mode.
z
x