Sanyo POA-MD13NET2 - Manual (Page 117)

29
Network Board
OWNER’S MANUAL
ENGLISH
E-Main Setting
*1 The SMTP server is a server for sending E-mail. Please contact your network administrator to
have this SMTP server address.
✐ To use the E-mail function, it must be set the DNS address on the Network Setting page correctly.
✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in
your network environment. If the SMTP server is located in your LAN (Local Area network),
the address set to SMTP server should be specified in the SMTP server located in your LAN.
The server located outside of your LAN may not be available for security reason. For further
information please contact your network administrator.
✐ Up to 10 e-mail addresses can be registered.
3 Condition selection for sending alert message
Click on the Option linked text. Check the
condition items under which alert mes-
sages will be sent and press
the Set button.
Please refer to chapter
“Examples :Type and con-
tents of alert messages”
described on the next page.