Sanyo POA-MD13NET2 - Manual (Page 131)

43
Network Board
OWNER’S MANUAL
ENGLISH
How to set the Timer
This function is used to turn the
projector off or on at a pro-
grammed day/date and time.
Follow the below steps for set-
ting.
1 Set a day or date
To set the timer event at
same time everyday,
select “day” entry with radio
button and then select
desired day with the pull-
down menu button. The selectable days are as follows:
- Same time everyday - Every week ( a day from Monday to Sunday)
- Every week (Monday to Friday) - Every week (Monday to Saturday)
To set the timer event on specified date,
select “date” entry with radio button and then type the date with
(Year/Month/Date) format.
Ex.: Type [2004/08/20] if you specify [August 20, 2004].
2 Set a time
Type the time with (Hour:Minute) and 24 hours format.
Ex.: Type [18:25] if you specify [PM 6 o’clock and 25 minutes].
3 Select an event “ON” or “OFF”.
Select an event ON or OFF with the pull-down menu button to turn on or off the
projector.
4 Register an event
Press the Set button to register the set
timer event. Repeat steps 1 to 4 for
another timer event setting.
Check the Timer events
To check the set timer events, click on
the Timer Check linked text.
Event
Select date
Select day
Control the Projector