beautypg.com

Creating project files—plc to devices – Siemens DTU3005-B User Manual

Page 17

background image

4

Creating Project Files—PLC to Devices

Siemens Energy & Automation, Inc.

13

Device Command Registers—allows you to indicate
which PLC registers will be used for device commands.

Device Defaults—allows you to set the default data
registers for more than one device of a certain type,
e.g., set the defaults for all 4720 power meters or all
S7-I/O units. The data registers can still be customized
for each device, as required. See Section 4.7.2 for
more information.

Device List—allows you to indicate which SEAbus
devices or Siemens protective relays are connected to
port 2 and which PLC registers they are communicat-
ing with.

If the Device Protocol for port 2 is set to VDEW (see
Section 4.4), then two additional menu items are available:
Global Command Registers and Device Text to Values
Table
. See Section 4.8 and Section 4.9 for instructions on
using these menu items.

4.3

PLC Setup—Port 1

You must have a PLC to Devices project file open to config-
ure port 1 using the instructions in this section. Select Port
1 (PLC)
from the Edit menu, and the Port 1 PLC Configura-
tion screen appears.