Sony DVW-250 - Manual (Page 51)

Making setup menu settings
Example: menu
Making setup menu settings
1 Press the DISPLAY button in the adjustment
controls once or twice until the setup menu appears
in the display.
Pressing the DISPLAY button cycles the display
through the video level meters, setup menus, and
audio level meters. If the display is showing the
video level meters or setup menus, and five
minutes elapse without an operation, the display
automatically reverts to the audio level meters.
2 Press the UP or DOWN button in the adjustment
controls to align the asterisk cursor (^) with the
required item (submenu).
Example: Top menu
3 Press the SET button.
This displays the selected submenu. Further
submenus are enclosed in angle brackets (
LEVEL> in the following example).
4 Press the UP or DOWN button to align the asterisk
cursor (^) with the required item.
5 Press the SET button.
This allows the value for the selected item to be
changed.
In cases where there are further nested submenus,
repeat steps 4 and 5 as required.
Example: menu
6 Press the UP or DOWN button to change the
setting.
7 When the required value is displayed, press the
SET button.
This confirms the new setting. To continue by
changing another setting, repeat from step 4.
Returning to the parent menu
Select the "EXIT" item, and press the SET button, or
press the DISPLAY button.
6-2 Chapter 6 Setup Operations