2 procedures for recording – Sony DVW-250 User Manual
Page 44
4-2 Procedures for Recording
Audio dubbing
Audio dubbing on the cue track
1 Switch the POWER switch on, and load a cassette.
2 Adjust the recording level of the audio source to be
recorded on the cue track.
For details, see the section "Adjusting the recording
levels " (page 4-5).
3 Press the PLAY button to play back the tape, then
press the PAUSE button at the point from which
you wish to dub the audio.
This pauses the tape transport.
4 Press the CUE DUB button.
The indicator lights.
5 Press the PAUSE button once more.
This ends the pause, and starts the audio dubbing.
6 To end the audio dubbing, press the STOP button.
In place of steps 3 to 5 above, pressing the PLAY
button and CUE DUB button simultaneously also
starts the audio dubbing.
4-16 Chapter 4 Recording