SMC Networks SMC2582W-B - Manual (Page 22)

• System Log. System events log.
• General. Global operations.
• Operational Mode. Operational mode settings.
• Password. For gaining rights to change the settings of the SMC2582W-B.
• Firmware Tools. For upgrading the firmware of the SMC2582W-B, backing up and restoring
configuration, and configuration reset settings of the SMC2582W-B.
• TCP/IP. TCP/IP- related settings.
• Addressing. IP address settings for the SMC2582W-B to work with TCP/IP.
• DHCP Server. Settings for the DHCP (Dynamic Host Configuration Protocol) server on the
SMC2582W-B.
• IEEE 802.11. IEEE 802.11b-related settings.
• Communication. Basic settings for the IEEE 802.11b interface of the SMC2582W-B to work
properly with wireless clients.
• Security. Security settings for authenticating wireless users and encrypting wireless data.
• Advanced. Advanced settings of the SMC2582W-B.
• Packet Filters. Ethernet Type Filters, IP Protocol Filters, and TCP/UDP Port Filters settings.
• Management. UPnP, System Log, and SNMP settings.
3.1.2. Save, Save & Restart, and Cancel Commands
Fig. 16. Save, Save & Restart, and Cancel.
At the bottom of each page that contains settings you can configure, there are up to three but-
tons—Save, Save & Restart, and Cancel. Clicking Save stores the settings changes to the mem-
ory of the SMC2582W-B and brings you back to the start page. Clicking Save & Restart stores the
settings changes to the memory of the SMC2582W-B and restarts the SMC2582W-B immediately
for the settings to take effect. Clicking Cancel discards any settings changes and brings you back to
the start page.
22