Sanyo POA-HDTM01 - Manual (Page 32)

You can adjust contrast and brightness of the output signal from the transmitter.
1. Press the MENU button to show the Menu. Press the Point de buttons to select Main
Menu "2/6: Image Adjust" and then press the SELECT button.
1/2: Contrast Setting
After the step 1;
2. Press the Point de buttons to select Sub Menu "1/2: Contrast Setting" and then press
the SELECT button.
3. Press the Point 7 8 buttons to adjust the contrast (-32 to +32).
2/2: Brightness Setting
After the step 1;
2. Press the Point de buttons to select Sub Menu "2/2: Brightness Setting" and then
press the SELECT button.
3. Press the Point 7 8 buttons to adjust the brightness (-32 to +32).
2/6: Image Adjust
Brightness 2/2
Setting
Contrast 1/2
Setting
Image 2/6
Adjust
Brightness
-32
Contrast
+32
TRANSMITTER
Information display can be used to confirm the current output signal from the transmitter.
1. Press the MENU button to show the Menu. Press the Point de buttons to select Main
Menu "3/6 Information" and then press the SELECT button.
2. The information "Link On / RF Frequency", "Link Off RF Frequency", "H/V Frequency"
and "H/V Resolution" will be displayed periodically.
3/6: Information
Link Off
RF Freq. ****MHz
Link On
RF Freq. ****MHz
Information 3/6
or
H Freq. ****
V Freq. ****
H Resol. ****
V Resol. ****
Other Basic Operation