beautypg.com

Mode select, Input id, Projector – Sanyo POA-HDTM01 User Manual

Page 27

background image

English

HD DATA WIRELESS TRANSMITTER BOX

OWNER'S MANUAL

Broadcast Mode Operation

Mode select

1. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to

move the red frame pointer to the HD DATA WIRELESS icon.

2. Use the Point de buttons to move the

red frame pointer to the Mode Select
icon and then press the SELECT button
twice. A dialog box appears.

3. Use the Point de buttons to select

Broadcast mode and then press the
SELECT button.

Input ID

1. Before inputting the ID Number, check

the ID Number in the transmitter.

2. Use the Point de buttons to select

Input ID and then press the SELECT
button.

3. Input the ID Number as follows;
Select a number by pressing the Point

de

buttons. And then press the Point

8

button to fix the number and move

the pointer. If you fixed the incorrect
number, move the pointer to the
number you want to correct by pressing
the Point 7 button, and then select the
correct number by pressing the Point
de

buttons.

4. Repeat this step to complete entering an

eight-digit number.

5. After entering the eight-digit number,

move the pointer to "Set" by pressing
the Point 8 button. Press the Select
button to continue.

6. Confirmation box appears, select [Yes] to

confirm the ID Number.

Mode Select Menu

PROJECTOR

Input ID Menu

Once authenticated in Single mode, the ID Number of the transmitter which has been set in Single

mode will be displayed as a default. When switching from Single mode to Broadcast mode, change the
ID Number to the new one of the transmitter.