beautypg.com

Basic setting and operation, Projector operation, Turning on the projector – Sanyo POA-HDTM01 User Manual

Page 17: Input selection

background image

English

1

HD DATA WIRELESS TRANSMITTER BOX

OWNER'S MANUAL

Turning on the Projector

1. Connect the projector’s AC power cord into an AC outlet and turn on the MAIN ON/OFF

Switch. The LAMP indicator lights red and the READY indicator lights green.

2. Press the ON/STAND-BY button on the side control or on the remote control. The LAMP

indicator dims red and the cooling fans start to operate. The preparation display appears
on the screen and the countdown starts.

3. After the countdown, the input source that was selected the last time and the Lamp

mode icon appear on the screen.

If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the
PIN code.

Input Selection

1. Press the INPUT 1/2/3/4 buttons on the remote control or INPUT 1/2 or 3/4 buttons on

the side control to select the HD DATA Wireless Board. (You can also select it with Menu
operation, refer to the owner's manual of the projector.)

2. Check the status of the POWER indicator on the HD DATA Wireless Board. When the HD

DATA Wireless Board is selected correctly, the POWER indicator lights green.

Projector Operation

INPUT MENU

Input Menu icon

Move the pointer (red arrow) to the

input which the HD DATA Wireless

Board is inserted and press the

SELECT button.

POWER Indicator

Receiver

Basic Setting and Operation