Flow of installation mode, Single mode operation, Broadcast mode operation – Sanyo POA-HDTM01 User Manual
Page 21: Transmitter projector

English
1
HD DATA WIRELESS TRANSMITTER BOX
OWNER'S MANUAL
Basic Setting and Operation
Single Mode Operation
When using a pair of transmitter and receiver for the first time.
Step 1:
Select "Single Mode" in
"Mode Select"..
Step 1:
Select "Single mode" in
"Mode select".
Step 2: Execute "Authentication".
Step 2:
Select "Execute" in
"Authentication".
Step 3: "Please wait ..." >>> "Success"
Step 3: "Please wait ..." >>> Su ccess
icon
When changing a pair of transmitter and receiver,
Step 1:
Execute "Initialize" to reset
the authentication.
Step 1:
Select "Reset" in
"Authentication".
Step 2: Execute "Authentication".
Step 2:
Select "Execute" in
"Authentication".
Step 3: "Please wait ...">>> "Success"
Step 3: "Please wait ..." >>> Su ccess
icon
Broadcast Mode Operation
When using a transmitter and receivers in broadcast mode.
Step 1:
Select "Broadcast Mode" in
"Mode Select"..
Step 1:
Select "Broadcast mode" in
"Mode select".
Step 2: Check the "ID Number".
Step 3:
Input the same ID Number
of the transmitter into "Input
ID".
Step 5: Adjust "Output Level".
Step 4: Check "Reception Level".
Flow of Installation Mode
TRANSMITTER
PROJECTOR