Sanyo POA-HDTM01 - Manual (Page 30)

0
This function allows you to lock the key operation on the transmitter.
To enter a new Lock Key
At first, set up a new Lock Key in the transmitter to operate Key Lock function.
✐
If a Lock Key is already set, this menu "Input Lock Key [#]### OK" will not be displayed.
1. Press the MENU button to show the Menu. Press the Point de buttons to select Main
Menu "5/6: Key Lock" and then press the SELECT button. "Input Lock Key [#]### OK"
will be displayed.
2. Use the Point ed buttons to enter a number (0 ~ 9). Press the Point 8 button to fix the
number and move to the next box.
3. Repeat this step to complete entering a four-digit number.
4. Press the Point 7 8 buttons to move the bracket to [OK] and then press the SELECT
button.
5. "1/2: Key Lock" will be displayed.
To set Key Lock
1. While Sub Menu "1/2: Key Lock" is displayed, press the SELECT button. "Key Lock ON
[OFF]" will be displayed.
2. Move the bracket from [OFF] to [ON] by pressing the Point 7 8 buttons and then press
the SELECT button.
2. "Key Lock" will be displayed.
3. While Key Lock is set to ON, when any button is pressed, "Input Lock Key #### OK" will
be displayed.
5/6: Key Lock
Input Lock Key
[#]### OK
Key Lock 5/6
Key Lock 5/6
Input Lock Key
#### [OK]
Key Lock 1/2
New Lock Key
[#]### OK
Change Lock Key
[#]### OK
Change 2/2
Lock Key
Key Lock
[ON] OFF
Key Lock
ON [OFF]
Key Lock 1/2
Input Lock Key
[#]### OK
Key Lock
Input Lock Key
[#]### OK
Key Lock 5/6
Key Lock 5/6
Input Lock Key
#### [OK]
Key Lock 1/2
New Lock Key
[#]### OK
Change Lock Key
[#]### OK
Change 2/2
Lock Key
Key Lock
[ON] OFF
Key Lock
ON [OFF]
Key Lock 1/2
Input Lock Key
[#]### OK
Key Lock
✐ Even when the AC power was shutdown, the key lock function is still available. If the transmitter is
locked with a lock key, "Input Lock Key" appears at turning on the transmitter. If the Lock Key is not
entered for 3 minutes after "Input Lock Key" appeared, the transmitter will be turned off automatically.
Other Basic Operation
TRANSMITTER