SATO GT424 - Manual (Page 81)

Section 4: Cleaning and Maintenance
GT Series Operator’s Manual Page 4-5
4.5 ADJUSTING PRINT QUALITY (CONT’D)
4.5.2 Adjusting Print Speed
Besides varying the rate at which labels are printed, this adjustment can be used to regulate any
changes in print quality.
LCD Panel — Print Speed can be set using the front panel LCD
panel or by sending the Print Speed software command from a
computer. On the GT408 and GT412, there are 11 settings, from
02 ip/s (slowest) to 12 ip/s (faster). The default setting is 6. On the
GT424, there are five settings, from 02 ip/s to 06 ip/s, and the default
setting is 3 ip/s.
For instructions on setting Print Speed, refer to page 3-7, Operation and Configuration.