SATO GT424 - Manual (Page 49)

Section 3: Configuration and Operation
GT Series Operator’s Manual Page 3-13
3.7 CARTRIDGE MODE
In this mode you can manage the optional memory cartridge that can be installed to provide
increased storage capacity for text and graphics.
3.7.1 Entering Cartridge Mode
1. Press the LINE button to take the printer OFFLINE.
2. Pull down the cover of the Operation Panel and press ENTER.
The ONLINE MODE screen appears.
3. Press the arrow buttons until you see
“CARTRIDGE MODE”, then press ENTER to perform the first
setting. At any time within this mode, pressing CANCEL takes
you back one screen. Pressing the FUNCTION button returns
you immediately to the main Cartridge Mode screen.
3.7.2 Cartridge Formatting Option
Use this function to clear the memory cartridge of all contents.
Press the / buttons to select either YES or NO.
Selecting NO returns you to the main Cartridge Mode screen.
Selecting YES causes the FORMAT START screen to appear (see
the next section).
Press the ENTER button to confirm the setting and proceed to the
next screen.
3.7.3 Start Cartridge Formatting
If you selected YES at CARTRIDGE FORMAT screen, this screen
lets you start or cancel the cartridge initialization procedure.
Press the / buttons to select either YES or NO.
Selecting NO returns you to the CARTRIDGE FORMAT screen.
Selecting YES begins the cartridge initialization (see page 3-14)
Press the ENTER button to confirm the setting and proceed to the
next screen.