Appendix d: general specifications – Star Micronics SP200F SERIES User Manual
Page 104
– 101 –
APPENDIX
Appendix D: General Specifications
Printing method:
Serial impact dot matrix
Print direction:
Bi-directional
Number of head pins:
7 wires
Number of print columns:
42 columns, 16 CPI
Character set:
ASCII
96 (characters)
Special characters
64
IBM special characters 83
International characters 12
Font configuration
7 (Half dots)
×
7 or 9 (Half dots)
×
7
Paper width
3.0 inch (76 mm)
CPI
16
13.4
Number of columns
42
35
Column spacing
(mm)
1.58
1.90
Character size
(mm)
1.28
Ч
2.87
1.59
Ч
2.87
Dot space
(H
×
V mm)
0.316
Ч
0.423
0.316
Ч
0.423
Print area
(mm)
66.0
66.0
Print speed:
Approx. 2.5 lines per sec.
Line spacing:
1/6-inch
Paper feed method:
Friction feed
Paper feed speed:
Approx. 9 lines/sec.
Paper specifications
Paper type:
Ordinary bond and carbonless copy paper
Paper width:
76
±
0.5 mm (3.0 inches)
Roll diameter:
85mm (3.35 inches) max.
Internal diameter of roll:
12
±
1 mm
Note: The paper must not be glued to the core.
Thickness
SP210
(single) 0.07 mm to 0.10 mm
(copies) Original + 2 copies (Max. 0.2 mm)
SP240
(single only) 0.07 mm to 0.10 mm
Note: The auto-cutter that is fitted to the SP-240 series is
designed to cut single ply paper to a maximum
thickness of 0.1mm. Cutting multi-ply paper, or
paper thicker than 0.1mm is not recommended as
the specifications of the auto-cutter cannot be
guaranteed.