The system configuration menu, The system configuration menu -22 – Symbol Technologies MK1000 User Manual
Page 70
3-22
MK1000 MicroKiosk Product Reference Guide
The System Configuration Menu
From the MK1000 Configuration menu (see
), press the Previous
or Next buttons to move the "<" cursor to the System option and press the Enter button.
The System Configuration menu displays:
Figure 3-13. System Configuration Menu
Table 3-4. System Configuration Menu Definitions
Field Name
Description
Info
When selected, the Info option displays the System
Information screen (see
). This screen
displays the boot part number, boot version,
operating system part number, and the operating
system version.
Date & Time
For future use. This field allows you to set the
system time.
Debug Mode
The Debug option can be used by programmers to
allow dumping output from their programs to either
a Serial port, or through a Telnet connection. If
Serial port is selected, the output goes to the Com/
Scanner port. (For programmer’s, that’s
C_SID_IO_UART1.) While debugging using the
Serial port, that port cannot be used by the user’s
application for any other purpose.
The default Debug Mode for the MK1000 is
DISABLED.
System Configuration
Info
Date & Time
Debug Mode
File/DBM
Embedded Apps = ENABLED
Passwords
<
= DISABLED