Symbol Technologies MK1000 - Manual (Page 12)

x
MK1000 MicroKiosk Product Reference Guide
• Appendix B, PCK Configuration Programming Bar Codes provides bar codes used
in PCK emulation configuration mode.
• Appendix C, Scanning Mode Programming Bar Codes provides bar codes used to
change the laser scan mode.
• Appendix D, MK1000 Fonts provides MK1000 fonts.
• Appendix E, Technical Specifications provides technical information about your
MK1000 and troubleshooting information.
• Appendix F, Troubleshooting provides troubleshooting information for your
MK1000.
• Appendix G, Table of MK1000 Communication Interfaces provides information
about the communication interfaces supported by the MK1000.
Notational Conventions
• Bullets (•) indicate:
• action items
• lists of alternatives
• lists of required steps that are not necessarily sequential
• Sequential lists (e.g., those that describe step-by-step procedures) appear as
numbered lists.
Related Publications
The following is a list of documents that you may find useful if you want to know more about
programming the MK1000.
• MK1000 Quick Reference Guide (p/n 72-52968-xx)
• VT 220 Terminal Emulation Program Programmer’s User Guide
(p/n SSS-9000-04).
Service Information
If you have a problem with your equipment, contact the Symbol Support Center. Before
calling, have the model number and serial number at hand.
Call the Support Center from a phone near the equipment so that the service person can
try to talk you through your problem. If the equipment is found to be working properly and