Siemens Gigaset SL56 - Manual (Page 25)

24
Handset settings
Gigaset SL56 / IM1 EN / A31008-M1752-R111-2-6Z19 / start_guide_time.fm / 24.7.07
Changing the name of a Bluetooth device
Open list
¢
s (select entry)
§Options Press the display key.
Rename Select and press §OK§ .
~ Change name.
Save Press the display key
a Back: Press and hold key.
Deregistering a Bluetooth device
Open list
¢
s (select entry)
§Options Press the display key.
Delete Entry
Select and press §OK§ .
a Back: Press and hold key.
Rejecting/accepting an unregistered
Bluetooth device
If a Bluetooth device that is not registered
in the list of known devices tries to con-
nect with the handset, you will be
prompted on the display to enter the PIN
for the Bluetooth device (bonding).
u Reject
§Go Back§ Press the display key.
u Accept
~ Enter the PIN for the Bluetooth
device you want to accept and
press §OK§ .
If you have accepted the device, you
can use it temporarily (i.e. for as long as
it is in the receiving range or until you
switch off the handset) or you can
include it in the list of known devices.
Once the PIN has been confirmed, save
to the list of known devices:
– Press the display key
Yes .
– Press the display key No :
use temporarily.
Changing the Bluetooth name of the
handset
You can change the handset name used to
identify it on the display of another Blue-
tooth device.
w
¢
ý
¢
Bluetooth
¢
Own Device
Name
Change Press the display key
~ Change name.
Save Press the display key
a Back: Press and hold key.
Restoring the handset default
settings
You can reset any individual settings and
changes that you have made. Entries in
the directory, the call-by-call list, the calls
list, the SMS lists (depending on base sta-
tion) and the handset's registration to the
base station as well as the content of My
stuff are retained.
w
¢
Ð
¢
Handset
¢
Reset Handset
Yes Press the display key.
a Press and hold (idle status).
Note:
If you deregister an activated Bluetooth device,
it may try to reconnect as an "unregistered
device".