Siemens Gigaset SL56 - Manual (Page 21)

20
Handset settings
Gigaset SL56 / IM1 EN / A31008-M1752-R111-2-6Z19 / start_guide_time.fm / 24.7.07
Sounds: setting the volume
During playback:
Options / v
Open the menu.
Volume Select and press §OK§ .
r Set volume.
Save Press the display key.
Renaming/deleting a sound/picture
You have selected an entry.
Options§ Open menu.
If a sound/picture cannot be deleted ( è),
these options are not available. Depend-
ing on the situation, you can select the fol-
lowing functions:
Rename
Change the name (max. 16 characters)
and press §§Save . The entry is stored with
the new name.
Delete Entry
The selected entry is deleted.
Delete List
All deletable entries in the list are
deleted.
A deleted ringtone is automatically
replaced.
Checking memory
You can check the remaining available
memory and the share of memory used
for screensavers, CLIP pictures and
sounds.
w
¢
Ï
¢
Capacity
” Back: press display key.
Activating/deactivating advisory
tones
Your handset uses ‘advisory tones’ to tell
you about different activities and sta-
tuses. The following advisory tones can be
activated and deactivated independently
of each other:
u Key click: every key press is confirmed.
u Acknowledge tones:
– Confirmation tone (ascending tone
sequence): at the end of making an
entry/setting and upon receipt of an
SMS (depending on base station) or
a new entry in the answering
machine list (depending on base
station) or the calls list
– Error beep (descending tone
sequence): when you make an
incorrect entry
– Menu end tone: when scrolling at
the end of a menu
u Battery low beep: the battery pack
requires charging.
w
¢
Ð
¢
Audio Settings
¢
Advisory Tones
¤
Change multiple line input:
Key Tones:
Select On or Off .
Confirm.:
Select On or Off .
Battery:
Select On , Off or In Call . The battery
warning tone is activated/deactivated
or only sounds during a call.
¤
Save changes: see page 30.
You cannot deactivate the confirmation
tone for placing the handset in the base
station.
Setting the alarm clock
Precondition: The date and time have
already been set (page 6).