Siemens Gigaset SL56 - Manual (Page 19)

18
Handset settings
Gigaset SL56 / IM1 EN / A31008-M1752-R111-2-6Z19 / start_guide_time.fm / 24.7.07
Settings for individual functions
Set the volume and melody depending on
the type of signalling required. For exter-
nal calls, you can also make a setting so
that the caller's name is announced after
the first ringtone. To do this, however, the
corresponding voice pattern must first
have been recorded (page 13).
w
¢
Ð
¢
Audio Settings
¢
Ringer Settings
q Select setting, e.g.
Ext. Calls and press §OK§ .
r Set volume (1–6).
s Scroll to the next line.
r Select melody.
s Only with setting
Ext. Calls : skip to next line.
r Activate or deactivate
Announce .
This feature requires caller
display (CLI).
§Save§ Press the display key to save
the setting.
In idle status, you can also open the menu
Ringer Settings by pressing t briefly.
Settings for all functions to ring the
same
w
¢
Ð
¢
Audio Settings
¢
Ringer Settings
¢
All
¤
Set volume and ringtone (see "Settings
for individual functions").
§Yes§ Press the display key to con-
firm the prompt.
a Press and hold (idle status).
Activating/deactivating the ringtone
You can deactivate the ringtone on your
handset before you answer a call or when
the handset is in idle status; the ringtone
can be deactivated permanently or just for
the current call. The ringtone cannot be
re-activated while an external call is in
progress.
Deactivating the ringtone permanently
* Press the star key and hold
until you can no longer hear
the ringtone.
The Ú icon appears in the display.
Re-activating the ringtone
* Press and hold the star key.
Deactivating the ringtone for the current
call
§Silence§ Press the display key.
Activating/deactivating the alert tone
In place of the ringer tone you can activate
an alert tone. When you get a call, you will
hear a short tone ("Beep") instead of the
ringtone.
*
Press and hold the star key
and within 3 seconds:
§Beep§§ Press the display key. A call is
now signalled by one brief
alert tone. You will now see
º in the display.
Vibration alarm
Incoming calls and other messages are
indicated by vibration.
w
¢
Ð
¢
Audio Settings
Silent Alert Select and press §OK§ ( = on). ‰