Siemens Gigaset SL56 - Manual (Page 13)

12
Using the directory and lists
Gigaset SL56 / IM1 EN / A31008-M1752-R111-2-6Z19 / start_guide_time.fm / 24.7.07
Delete Pattern (directory only)
Delete voice patterns (page 14).
Copy Entry
Send a single entry to a handset
(page 12).
Delete List
Delete all entries in the directory/call-
by-call list.
Copy List
Send complete list to a handset
(page 12).
Available Memory
Display the available entries in the
directory and call-by-call list (page 10).
Using quick dial keys
¤
Press and hold the required quick dial
key (page 15).
Sending the directory/call-by-call list
to another handset
Preconditions:
u The sending and receiving handsets
must both be registered to the same
base station.
u The other handset and base station can
send and receive directory entries.
s / C
¢
s (Select entry)
¢
§Options§ (Open menu)
¢
Copy
Entry / Copy List
¢
to Internal
~ Enter the internal number of
the receiving handset. You see
Copying entry .
§Yes§ / §No§ Press the display key.
A successful transfer is confirmed by a
message and confirmation tone on the
receiving handset.
Please note:
u Entries with identical numbers are not
overwritten on the receiving handset.
u The transfer is cancelled if the phone
rings or if the memory of the receiving
handset is full.
Transferring the directory as a vCard
with Bluetooth
In Bluetooth mode (see page 23) you can
transfer directory entries in vCard format,
e.g. to exchange entries with your mobile.
s
¢
s (Select entry)
¢
§Options§ (Open menu)
¢
Copy Entry /
Copy List
¢
vCard via Bluetooth
The list of "Known Devices" (see page 23)
is displayed.
s
Select device and press §OK§ .
Receiving a vCard with Bluetooth
If a device from the "Known Devices" list
(see page 23) sends a vCard to your hand-
set, this occurs automatically and you are
informed about it via the display.
If the sending device does not appear in
the list, you will be asked on the display to
enter the device PIN for the sending
device:
~
Enter the PIN for the sending
Bluetooth device and press
§OK§ .
The transferred vCard is available as a
directory entry.
Adding a displayed number to the
directory
You can copy numbers that are displayed
in a list, e.g. the calls list or last number
redial list, in an SMS (depending on the
base station) or during a call.
If you have CNIP, the first 16 characters of
the transmitted name are copied to the
Name line.
A number is displayed:
§Options§
¢
Copy to Directory
¤
Complete the entry, see page 11.
Note:
You can also send the complete directory via
data transfer, without opening the directory:
w
¢
ý
¢
Directory .