Sharp AR-201 - Manual (Page 8)

6
GETTING ST
AR
TED
Operation
panel
PART NAMES AND FUNCTIONS
INTERRUPT ( ) key and indicator (p. 25)
Interrupts a copy run.
Copy quantity display
Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
are made. Also see items
and .
ZOOM indicator (p.17)
Lights up when a zoom ratio is set.
Copy ratio display ( ) key (p. 17)
Press and hold down during standby to display the copy
ratio in the copy quantity display.
Zoom keys (p. 17)
Use to select any reduction or enlargement copy ratio
from 50% to 200% in 1% increments.
PAPER SIZE ENTER ( ) key (p.12)
Use to set the paper size in a tray.
AUDIT CLEAR ( ) key (p.13)
Closes an open account.
PAPER SIZE indicators
Light up to show the selected copy paper size.
Alarm indicators
: Maintenance indicator (p.35)
: Toner cartridge replacement required indicator
(p.28)
: Developer replacement required indicator (p.35)
: Paper required indicator (p.10)
: Misfeed indicator (p.30)
POWER SAVE ( ) indicator (p. 43)
Lights up when the copier is in a power save mode.
SPF indicator (p. 58)
Lights up when originals are set in the optional SPF
tray.
Output tray full indicator (p. 61)
Indicates copies must be removed from the paper output
tray.
B/W REVERSE ( ) key and indicator (p. 23)
Press to reverse the black and white areas.
XY-ZOOM ( ) key and indicator (p. 21)
Press to change the horizontal and vertical copy ratios
independently.
SORT/GROUP ( / ) key and indicators
(p. 61)
Press to select the sort or group mode when an optional
electronic sorting kit and an optional SPF are installed.
ORIGINAL DATA ( ) indicator
Blinks when the memory becomes full of scanned
original image data. (Used when an optional electronic
sorting kit and an optional SPF are installed)
2 IN 1 / 4 IN 1 ( / ) key and indicators
(p. 63)
Press to select the 2 in 1 or 4 in 1 mode. (Only available
when an optional electronic sorting kit and an optional
SPF are installed)
AUTO/MANUAL/PHOTO ( / / ) key and
indicators (p. 14)
Use to sequentially select the exposure modes: AUTO,
MANUAL, or PHOTO.
Light ( ) and dark ( ) keys and indicators (p.
15)
Use to adjust the MANUAL or PHOTO exposure level.
Numeric keys
Use to select the desired copy quantity or to make user
program entries.
GETTING ST
AR
TED
P
art names and functions