Sharp AR-201 - Manual (Page 48)

46
GENERAL INFORMA
TION
Transfer charger cleaning
If copies start becoming streaky or blotchy, the transfer charger may be dirty.
Clean the charger using the following procedure.
1 Turn the power switch off.
2 Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.
3 Gently lift and pull out the upper paper tray and take the
charger cleaner out by holding the tab.
4 Set the charger cleaner onto the transfer charger and
gently slide the cleaner in the direction indicated by the
arrow two or three times.
Slide the charger cleaner from one end to the other end
along the groove of the transfer charger. If the cleaner
is stopped on the way, smudges on copies may occur.
● If the white sheet metal is smudged with toner, wipe it with a soft, clean
cloth.
5 Return the charger cleaner to its original position.
Close the upper paper tray. Close the side cover by
pressing the handle on the cover.
6 Turn the power switch on.
USER MAINTENANCE
User maintenance
Charger cleaner