Sharp AR-201 User Manual
Page 43
41
GENERAL INFORMA
TION
User programs
USER PROGRAMS
Program No. 14: Number of copies per account
Program No. 14 is used to display the total number of copies made against
each account number. When program No. 14 is entered, an account number
will appear in the copy quantity display.
●
If no account number has been registered, “14E” will appear in the copy
quantity display. Press the
key. The copier will return to step 2 on page
37.
1.
Use the copy ratio display (
) key to select the account
number.
●
Use the
key to advance through the account numbers.
2.
Press and hold down the 0 key.
●
The number of copies made against the specified account number will
be displayed. The two higher digits and the three lower digits will
appear alternately while the 0 key is pressed.
Example: 1,234 copies
●
The upper limit for the number of copies is 49,999. If the number of
copies made reaches 50,000, the number will be reset to 0 and counting
will start again from 0.
3.
Repeat steps 1 and 2 for other account numbers.
4.
To continue with other user programs, press the
key
and select another program number. To exit the user
program mode, press the light (
) key.