Sharp AR-201 - Manual (Page 15)

13
MAKING COPIES
AUDITING ACCOUNTS
If this copier has been programmed in the auditing mode, it will not function
until an assigned 3-digit account number has been entered. See page 39 for
setting the auditing mode.
If the copier has been programmed in the auditing mode, “ – – – ” will appear
in the copy quantity display in the initial conditions.
1 Enter your account number using the numeric keys.
● As each digit is entered, the dashes in the copy quantity display will
disappear.
● After the number is entered, the copy quantity display will change to
0.
● If an unassigned number is entered, “ – – – ” will appear again in the
copy quantity display, indicating that the number was not accepted.
2 When copying is completed, press the AUDIT CLEAR
(
) key.
● “ – – – ” will appear again in the copy quantity display, indicating the
auditing mode.
● In the interrupt copy mode (see page 25), press the INTERRUPT ( )
key after an interrupt copy run is completed. All previous copier
settings will be restored and the previous account number will be
active.
Auditing accounts