Toner save mode – Sharp AR-201 User Manual
Page 29
27
MAKING COPIES
Toner save mode
1
Press the AUTO/MANUAL/PHOTO (
/
/
) key to
select the MANUAL (
) mode.
2
Press and hold down the AUTO/MANUAL/PHOTO (
/
/
) key for approximately 5 seconds.
●
The MANUAL (
) indicator will go out and the PHOTO (
)
indicator will begin to blink.
●
The exposure indicator marked “5” will light up, indicating that the
standard toner mode is active.
3
To enter the toner save mode, press the light (
) key.
●
The exposure indicator marked “1” will light up, indicating that the
toner save mode is selected.
4
Press the AUTO/MANUAL/PHOTO (
/
/
) key.
●
The PHOTO (
) indicator will stop blinking and will light up
steadily. The toner save mode is now active.
●
To return to the standard mode, repeat the procedure but use the dark
(
) key to select exposure level “5” in step 3.
TONER SAVE MODE
This mode reduces toner consumption by approximately 10% in the automatic
and manual exposure modes. Copies will be lighter but still adequate for
general use. Selection of this mode does not affect the PHOTO mode. Follow
the procedure below for setting the toning level.