Sharp AR-201 - Manual (Page 2)

CAUTIONS
Follow the cautions below when using this copier.
● The fusing area is hot. Exercise care in this area when removing misfed paper.
● Do not look directly at the light source. Doing so may damage your eyes.
● Place the copier on a firm, level surface.
● Do not install the copier in a humid or dusty location.
● When the copier is not used for a long time, for example, during prolonged holidays, turn the power
switch off and remove the power cord from the outlet.
● When moving the copier, be sure to turn the power switch off and remove the power cord from the
outlet.
● Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may
prevent heat dissipation, damaging the copier.
● Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous laser radiation exposure.
Cautions on laser
Wave length 785 nm ±10 nm
Pulse times (8.141 µs ±0.1 µs)/7 mm
Output power 0.2 mW ±0.02 mW