Sharp AR-201 - Manual (Page 31)

29
ST
A
TUS
INDICA
T
ORS
Toner cartridge replacement
TONER CARTRIDGE REPLACEMENT
5 Gently insert the toner cartridge along the guides until
it locks in place while pushing the lock release lever.
6 Pull out the shutter and remove it from the toner cartridge
as shown in the illustration.
If dirt or dust is adhered to the toner cartridge, remove
it before installing the cartridge.
7 Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover. The
indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
Toner cartridge life
To find out the approximate quantity of toner remaining, follow the procedure
below.
1 Press and hold the light ( ) key for more than 5
seconds until all the alarm indicators ( , , , ,
and ) blink and “– –” appears in the copy quantity
display.
2 Press and hold the copy ratio display ( ) key for more
than 5 seconds.
● The approximate quantity of toner remaining will be indicated as a
percent in the copy quantity display. If “LO” is displayed, the toner is
down to less than 10%.
3 Press the light ( ) key.
● All the alarm indicators will go out.