Menu operation, Picture menu, Sound menu – Sanyo CE42LH2WP User Manual

Page 9: Time menu, Setup menu

MENU OPERATION

Picture menu

Use the

or button to select Advanced settings and press

the

or button to enter the sub menu as follows.

DCDi (Directional Correlational Deinterlacing) is used to process
moving angled edge in deinterlacing to get the smoothest and most
natural image. Press the

or button on the remote control to

select On or Off.

ACC/ACM (ACC: Adaptive Contrast and Color; ACM-II: Active Color
Management-II) is used to select adaptive Brightness, Contrast and
tone control. Press the

or button on the remote control to

select suitable mode either Vivid, Cinema, Sport or Off.

CCS (Cross Color Separation) is used to remove residual chroma
information from luminance signal which is the result of imperfect
decoding of composite video. Press the

or button on the

remote control to select either Auto, Standard or Off.

DNR (Digital Noise Reduction) is available for noise reduction. Press
the

or button on the remote control to select either Auto,

Low, Mid, High or Off.

MPEG NR (MPEG Noise Reduction): Removes unwanted ringing and
EORFNQRLVHIURPLPDJHVWKDWKDYHXQGHUJRQH03(*RU-3(*FRP-
pression and decompression. Press the

or button on the

remote control to select On or Off.

Film Mode

,QYHUVHSXOOGRZQ)LOPYV9LGHR'HWHFW¿OP3HUIRUPHG

on material which underwent technologic conversion to video. Press the
or button on the remote control to select On or Off.

Sound menu

Press the MENU button and select Sound using the

or but-

tons, press the

or button to enter.

Select and adjust to obtain the best sound settings for your environ-
ment using the

or button to select Treble, Bass or Balance

and the

or button to adjust levels.

Bass Expander can also be selected using the

or button

and pressing the

or button to select On or Off.

These settings automatically store when you exit the menu.
Press the BACK button to return to the previous menu.
Press the MENU button to exit menu operation.

Time menu

Press the MENU button and select Time using the

or but-

tons, press the

or button to enter. Press the BACK but-

ton to return to the previous menu. Press the MENU button to exit
menu operation.

N Current Weekday

8VHWRVHWFXUUHQWZHHNGD\XVLQJWKH or button.

N Current Time

Use to set the current time using the Numeric buttons.

Other items in Time Menu should not be selected until Current

Time has been set.

N Schedule

Use to set up to 20 separate time schedules for “Power On” or “Power
Off”, select 1 ~ 20 using the

or button.

N Weekday

8VHWRVHWWKHVFKHGXOHIRU³3RZHU2Q´RU³3RZHU2II´RIDQ\ZHHNGD\
from Sunday through to Saturday or Everyday using the

button.

N Time

Use to set the schedule for “Power On” or “Power Off” of any time us-
ing the Numeric buttons.

N Action

Use to set the schedule for “Power On” or “Power Off” active using
the

or button.

You can set Power On timer in Time menu selecting “ON” in “On
Timer Function” in Installation Mode. If it is selected “OFF”, Power On
display in Time menu does not functional.

N On Program

Use to select AV1, RGB, AV2, AV3, PC, DVI or Network for the
schedule of “Power On” using the

or button.

N Active

Use to select ON or OFF using the

or button. When set

³2))´WKHDERYHLWHPV³6FKHGXOH´³:HHNGD\´³7LPH´³$FWLRQ´RU³21
Program” will be inactive.
Use NUMERIC buttons [0 ~ 9] to set On Time. (Action “Power On”
– 00:00 ~ 23:59)

Once On Time has been set, when the set time is reached, the

monitor will leave the stand-by status and enter to the source
automatically.

After On Time has been set, you can go on watching other pro-

grams. When the set time is reached, the monitor will automatically
switch to the preset program.

On Program can only be selected whenAction (Power On) has

been set.

Action (Power Off) can be set to turn the monitor into standby at a

selected time

Once On Program has been set, when the set time is reached, the
monitor will enter to the preset source automatically.
Use the

or button to select On program, AV1, RGB, AV2,

AV3, PC, DVI or Network.

Setup menu

Press the MENU button and select Setup using the

or but-

tons, press the

or button to enter. Press the BACK but-

ton to return to the previous menu. Press the MENU button to exit.

N Menu Setup

Whenever Setup menu is accessed initially, Menu Setup will be the
default selection. Press the

or button to enter the sub menu.

This manual is related to the following products:

CE42LH2DPB