Sanyo DP15647 User Manual

Model nos, First-things-first, We can help

CONNECTING A STEREO
AMPLIFIER TO THE DTV

CONNECTING A MULTICHAN-
NEL RECEIVER TO THE DTV

LCD Owner’s Manual

Model Nos.

DP15647
DP19647

ENGLISH

Part No.:

1JC6P1P0247B –

FIRST-THINGS-FIRST

(REQUIRED INITIAL SETUP)

Install batteries in remote control (2AA, not included)

Plug in AC power cord (120V AC, 60 Hz.)

Press the POWER key.

(Follow on-screen instructions)

Perform “All Channel Search.”

The All Channel

Search will search for off-air digital and analog
channels, and analog cable channels. The DTV will
receive cable or off-air channels, but not at the
same time. If after two searches the DTV still fails
to detect any channels, the DTV will tune to
Video1.

Note:

EXIT is pressed,

the DTV will skip Channel
Search and tune to Video1
without storing any chan-
nels in the Channel Map
database.

PRECAUTIONS

To ensure safe operation, please observe the following
precautions:

eplace both batteries at the same time. Do not use a new

battery with a used battery.
Risk of explosion, if battery is replaced by an incorrect type.
Do not expose the Remote Control Unit to moisture or

heat.

Connect a Component cable to the VIDEO2 / 3
Green, Blue, and Red video jacks.

Connect an Audio Cable to the VIDEO2 / 3
White and Red audio jacks.

Press INPUT to select Video2 or Video3 to
view the program.

Note: VIDEO2 and VIDEO3 jacks have identical

functions. Compatible video devices can be
connected to either or both jacks.

VIDEO 2 / 3 (COMPONENT VIDEO IN
JACKS)

DTV

DVD Player

or similar digital

device, such as a Satellite Receiver

Y- Pb- Pr
Component
Jacks

OPERATING TIP:

You DO NOT need to tune the TV
to Channel 3 or 4 to view DVD
program.

Audio L/R Jac

Please call us at

1.800.877.5032

if you need

assistance with your new HDTV.

We can Help!

Visit us at www.sanyoctv.com

for more information about these models.

RF ANTENNA

CABLE

CABLE BOX

or SATELLITE BOX

Specifications

Power Requirement: Source: AC 120V, 60Hz
Power Consumption:

DP15647: 40 watts
DP19647: 50 watts

Connect Signal to the TV’s Integrated Analog / Digital
75 ohm Antenna Input terminal

CONNECTING A DVD OR
GAME TO THE DTV

CONNECTING A VCR OR DVD TO THE DTV

VIDEO1 (ANALOG) JACKS

VCR or DVD

DTV AV Input Jacks

Connect a Composite cable to the VIDEO1
Yellow, White, and Red AV jacks.

OPTIONAL
Connect DVD to the TV S-Video In Jack, if avail-
able on your external equipment.

Note: S-Video jack connection overrides Video jack

connection (VIDEO1).

Press INPUT to select Video1 to view the VCR or
DVD program.

S-Video

Jack

(Optional)

Connect a Multichannel Receiver to the TV Digital
Audio Output as shown.

Note: Dolby

Digital 5.1 audio is available at the Digital

Audio Output only when received as part of a
Digital Antenna signal.

DIGITAL AUDIO OUT JACK

Back View of TV

Coaxial Cable

Multichannel Receiver

If you experience

problems, please call

1-800-877-5032,

We Can Help!

Remote Control

IMPORTANT FACTS:

Don’t be fooled by the phrase
“Available in High-Definition.”
Composite jacks offer only 480i
(SDTV) resolution.

To view available High-Definition
(HD) programs, you must connect
your HD equipment to the
Component jacks.

Enter Key—Press to select an option from the
menu system, when required.
Exit Key—Press to exit from the menu system.

➅

PIX Shape Key—Use to change the video display
format. Available options depend on signal
received and the broadcast’s aspect ratio. Note:
Cannot display picture on a full screen. Check
Aspect Ratio of broadcast. Then press PIX Shape
key to change setting.

➆

Reset Key—Press this key twice to restore factory
settings. The TV will automatically start Channel
Search and clear all customized settings. Note:
Channel scan memory database list of digital
and analog channels will be replaced. If desired,
personal settings can be made again using the
menu options.

➇

Audio Key—Press to select the desired audio
mode (if available).

➈

Caption Key—Captioning is text information
transmitted along with the picture and sound so
it can be displayed on the TV screen.
Press CAPTION to select mode options: Digital
CC1 ~ CC6, or Analog CC1 ~ CC4, OFF, or
QuikCap. (QuikCap switches captions on and off
with the Mute function.) Digital Captions can be
changed using the menu settings.

➉

Mute Key—Press once to mute the sound.

Recall Key—Press to switch between the last
two channels selected.

Sleep Key—Press this key then the “0” key to set
the Sleep Off Timer. Time can be set in 30-minute
increments up to 3 hours. Note:The Sleep Timer
cancels when the TV is turned off or if a power failure
occurs.

1– – Key—For Analog Cable channels above 100,
press this key, then press the other two numbers.

Info Key—Press to display the Digital and Analog
Full Banner information. The banner contains the
following: program title, station ID, program rat-
ing, signal strength, channel number, tuner ID,
and audio information.

REMOTE CONTROL OPERATION

➀
➁

➂

➃

➅

➇

➉

➆

➠

Point

towards TV

➈

➄

➀

Input Key—Press to select the program source
to watch: TV, Video 1, Video 2, or Video 3.

➁

Volume Keys—Press VOL – + to adjust.

➂

Number Keys—Press two keys to select a chan-
nel. Example: Press 0 then 6 to select channel
6. (See #13.)

➃

Channel Scanning (CH

▲ ▼ ) Keys—Press to

scan through the channels in memory.

➄

Menu Navigational Keys:
Menu—Press to display on-screen menu.
Cursor

▲ (up) ▼ (down) keys—Press these

keys to move the cursor up and down within
the menu.
Cursor < (left) > (right) keys—Press these keys
to move the cursor left and right within the
menu.

Stereo

Amplifier

Back View of TV

Connect a Stereo Amplifier to the TV
Audio Out jacks as shown.

Note:

Do not connect external speakers
directly to the DTV.

AUDIO OUT (ANALOG) JACKS

Composite

Jack

Analog / Digital

Antenna In

DP15647

Trademarks Information:

Manufactured under license from Dolby Laboratories.
“Dolby” is a trademark of Dolby Laboratories.

Remote Control

Initial on-screen

ALL Channel Search

ALL Channel Search [Analog & Digital]

➠

The Tuner in this DTV can receive:

1. Digital and /or Analog Off-Air

Signals from an RF antenna.

OR
2. Analog or ClearQAM cable chan-

nels.

Note: You must search for ClearQAM

channels using the “Digital
Cable Search” menu option.

3. The output from a VCR or cable

box.

Digital signals from a Set-Top Box
(STB) should be received through
the Component In jacks.

This DTV can receive ANY unscram-
bled RF signal being broadcast.

Game console

Y- Pb- Pr
Component
Jacks

Audio L/R

Jac

➃