Sanyo CE42LH2WP - Manual (Page 24)

4
• Anti-tamper ink has been placed on the screws on the back plate, AV insert and outer back
cabinet.
• This is to identify if the screws have been removed. Any attempt to remove the anti-tamper ink will
be CLEARLY visible.
• In the event that the back plate is removed, the sealing of the set will be compromised, therefore,
SANYO can not accept liability for any related failure.
‡$OOEDFNSODWHÀ[LQJVFUHZVXWLOLVHUXEEHUVHDOLQJZDVK-
HUV7KLVLPSURYHVWKHDLUWLJKWLQWHJULW\RIWKHÀ[LQJDQG
therefore MUST NOT be removed.
‡2QO\ZDOOPRXQWÀ[LQJDQGWHUPLQDOFRYHUVFUHZVPD\
be removed by the installer. Under no circumstances
should non-SANYO screws be used as replacements.
ANTI-TAMPER INK
SCREWS
‡$VHFXULW\À[LQJSRLQWLVSURYLGHGRQWKHEDFNSODWHLQ
order to secure the monitor to the installation point with
a security device.
• This is NOT for lifting purposes. Lifting the monitor by
WKHVHFXULW\À[LQJSRLQWZLOOFDXVHGHIRUPDWLRQRIWKH
back plate, resulting in possible breakdown of the weath-
erproof seal.
SECURITY FIXING POINT
(42 inch model only)
ANTI-TAMPER INK
RUBBER WASHER