Smeg CS150SA - Manual (Page 8)

10
Instructions for the Installer
3. ADAPTATION TO DIFFERENT TYPES OF GAS
Before performing any cleaning or maintenance work, switch off the
power supply to the appliance.
The cooking hob of the cooker is preset for G20 natural gas at a pressure
of 20 mbar. In the case of functioning with other types of gas the burner
nozzles must be changed and the minimum flame adjusted on the gas
taps. Replace the burner nozzles as indicated in the table of the gas to be
used.
3.1 Changing nozzles
1 Extract the grids and remove all the caps and flame-spreader crowns;
2 unscrew the burner nozzles with a 7 mm socket wrench;
3 proceed with replacing the burner nozzles in accordance with the table
for the gas in question.