Sharp IM-MT899H - Manual (Page 63)

02/2/21 IMMT899H_E_6.fm
E-54
IM-MT899H
ENGLISH
Ref
e
rences
-E
rr
or M
ess
a
g
es
-
Number or symbol appears in (*) position.
If the operation is not accepted, "--" may be displayed on the
main unit. For details, refer to the display on the remote con-
trol.
ERROR MES-
SAGES
MEANING
N-FULL z The number of a disc, group, or track
name exceeds 40.
(Shorten the name.)
NoDISC z A disc has not been loaded.
noSIG z Poor connection of the digital cable.
z No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
z The input signal has improper sam-
pling frequency.
NoTRACK z There is no track to be played.
PLAYmd z You tried to record on a playback-only
disc.
POWER ? z The battery charger is defective.
PROTECTED z The write protection tab of a MiniDisc
is set to the protected position.
Sorry z Since a track number is currently be-
ing located or updated, the unit cannot
accept your command.
(Wait for a while and try the operation
again.)
T Form (*) z There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
ERROR MES-
SAGES
MEANING
T-FULL z There is no space left for recording
character information (track names,
disc names, etc.).
TEMP! z The temperature is too high.
(Turn off the power, and wait for a while.)
Tr. Protect z The track has been protected from be-
ing erased.
(Edit the track with the device on which it
was recorded.)
?DISC z A disc which contains data other than
music was played.
(A disc which contains nonmusic data
cannot be played.)
?GrForm z The group recording or the GROUP
RESERVE function cannot be per-
formed.
(Erase the disc name and retry the same
operation.)