Sharp IM-MT899H - Manual (Page 40)

02/2/21 IMMT899H_E_4.fm
E-31
IM-MT899H
ENGLISH
Useful Feat
ures
-Recor
d
ing f
rom a M
icr
op
hone-
Recording from a Microphone (continued)
To interrupt recording
Move the M button toward .
z Recording starts by moving the M button toward
again.
z You can perform the same operation by pressing the
button on the main unit.
z The track number will be increased by one each time
the recording is interrupted.
To stop recording
Move the M button toward .
You can perform the same operation by pressing the
button on the main unit.
To write recorded contents on the MiniDisc
Move the M button toward whilst in the stop mode.
Notes:
z Whilst making a mic recording, do not connect any-
thing to the OPTICAL/LINE IN socket on the portable
MD.
z To use a microphone, be sure it is a plug-in-power
type microphone.
z Insert the plug firmly. If you don't, the recording will not
be made properly.
z Use a microphone with a 3.5 mm (1/8") diameter ste-
reo mini plug.
z If the unit starts recording too often from low unwanted
noises, set the microphone input to "L(Low)".
z Recording sensitivity can be changed whilst recording.
9
Move the M button toward
or to select "S(SYNC)"
and press it.
10
Press the M button.
Synchro recording will be
paused.
11
When a sound, such as person speaking, is
picked up by the microphone, recording will be-
gin automatically.
- When a plug-in-power type microphone is plugged in,
the portable MD will provide power for the microphone's
operation.
- If a different type of microphone is plugged in, it may not
operate properly or it may cause the unit to malfunction.