Sharp IM-MT899H - Manual (Page 25)

02/2/21 IMMT899H_E_3.fm
E-16
IM-MT899H
ENGLISH
B
asic Opera
tion
-Re
c
or
ding-
„ Adding tracks to an existing group About the TOC
After any recording or editing function, "TOC" (Table Of
Contents) is displayed. To finalise the recording or editing
function, turn the power off. During this process "TOC"
will flash and "T-EDIT" will be displayed. During any
recording or editing function, the MiniDisc unit lid is
locked, and the MiniDisc cannot be removed until the pro-
cess is finalised.
Warning:
If the power is removed (Battery/AC adaptor) whilst
"TOC" is displayed, the MiniDisc unit lid will remain
locked until the battery/main power is restored and the
unit is turned on. Your new recordings or edited changes
will be lost and your MiniDisc may become unusable.
Caution:
Whilst "TOC" or "T-EDIT" is displayed, follow the instruc-
tions below.
Otherwise, tracks may not be recorded properly.
1 Hold down the REC button for 2 seconds or
more.
2 Hold down the GROUP button for 1 second or
more to display "GROUP".
3 Press the M button.
The unit enters the menu select mode.
4 Move the M button toward
or to select
"G(GrSELECT)" and press
it.
5 Move the M button toward or to select
the group you want to add tracks to and press
it.
NEWGr
To create a new group.
Gr01, Gr02, Gr03...
To add tracks to an existing group. (If the group
name has been recorded, the name will be dis-
played instead of "Gr01".)
NonGr
To record tracks as non-group.
6 Start recording.
- Do not jerk or bump the unit.
- Do not unplug the AC adaptor.
- Do not remove the rechargeable battery or an alkaline
battery.
- Do not subject the unit to shock.