Sharp IM-MT899H - Manual (Page 23)

02/2/21 IMMT899H_E_3.fm
E-14
IM-MT899H
ENGLISH
B
asic Opera
tion
-Re
c
or
ding-
Notes:
z Changing the volume level whilst recording does not
affect the recording.
z You cannot adjust the bass level whilst recording.
1
Plug the remote control into the REMOTE socket on
the unit.
2
Hold down the REC button for 2 seconds or more.
You can perform the same operation by simply pressing
the REC button on the main unit.
3
To perform group recording,
hold down the GROUP button
for 1 second or more so that
"GROUP" is lit.
z The unit is ready to record a new group. (To select a
group, refer to page 16.)
z When group recording is not performed, hold down
the GROUP button for 1 second or more so that
"GROUP" goes out.
z Setting for the group recording will not be changed un-
til a new setting is entered.
4
Begin playback on the stereo system connected to
this portable MD.
5
Move the M button toward or to adjust the re-
cording level (page 15).
You can perform the same operation by holding down
the
or button on the main unit.
6
Press the PAUSE button on the stereo system to en-
ter the playback pause mode.
Here you can search for the track to record.
7
Press the MODE button repeatedly to select the re-
cording mode (page 27).
You can perform the same operation by pressing the
MODE button on the main unit.
8
Move the M button toward .
You can perform the same operation by pressing the
button on the main unit.
9
Begin playback on the stereo system, the output will
be recorded.