Sharp IM-MT899H - Manual (Page 39)

02/2/21 IMMT899H_E_4.fm
E-30
IM-MT899H
ENGLISH
Useful Feat
ures
-Recor
d
ing f
rom a M
icr
op
hone-
„ Sound-actuated recording (Mic Synchro-
nised recording)
The unit automatically pauses when the microphone
does not pick up any sound for 3 seconds or more.
(Pause function does not work for approximately 10 sec-
onds after a recording starts.) When the microphone
picks up sound again, recording starts automatically.
Continued to the next page.
1
Hold down the REC button for 2 seconds or more.
You can perform the same operation by simply press-
ing the REC button on the main unit.
2
To perform group recording, hold down the
GROUP button for 1 second or more so that
"GROUP" is lit.
When group recording is not performed, hold down
the GROUP button for 1 second or more so that
"GROUP" goes out.
3
Move the M button toward or to adjust the
recording level (page 15).
The same operation can be performed by pressing
the
or button on the main unit.
4
Press the MODE button repeatedly to select the
recording mode (page 27).
5
Press the M button.
The unit enters the menu select mode.
6
Move the M button toward
or to select "M(MIC SYNC
LEVEL)" and press it.
7
Move the M button toward or to select the
recording sensitivity and press it.
H (High): Recording starts when the unit detects -24
dB or more (the unit can start recording
from quiet sounds).
L (Low): Recording starts when the unit detects -12
dB or more.
8
Press the M button.
z The unit enters the menu select mode.
z You can perform the same operation by pressing
the SYNC button on the main unit. (At this time,
steps 9 - 10 can be omitted.)